28 ago 2026 · Routine Inspection
Aprobado
- Menor Problemas con equipos o utensilios
Los equipos, utensilios, termómetros, tablas de cortar o artículos desechables no estaban en buenas condiciones, no eran del tipo adecuado o no se guardaban correctamente.
Redacción oficial (en inglés): Equipment, utensils: Approved, in good repair, adequate capacity
Nota del inspector (en inglés): Repeat Violation: The handles of the two door upright freezer and the undercounter cooler are broken off and in disrepair. The plastic wrapping of the doors is peeling and fraying. [CA] Ensure equipment is maintained in good repair and clean so as to not become a source of contamination. - Menor Problemas de limpieza o desinfección
Los platos, equipos o superficies que tocan los alimentos no se lavaban, enjuagaban y desinfectaban correctamente, o el desinfectante no tenía la concentración adecuada. Las superficies limpias ayudan a evitar que los gérmenes lleguen a la comida.
Redacción oficial (en inglés): Warewash facilities: installed/maintained; test strips
Nota del inspector (en inglés): Repeat Violation: Facility has the wrong testing materials for their choice of sanitizer, quaternary ammonia. Facility had chlorine test strips available. [CA] Testing equipment and materials shall be provided to adequately measure the applicable sanitization method used during manual or mechanical warewashing. - Menor Problemas de limpieza o desinfección
Los platos, equipos o superficies que tocan los alimentos no se lavaban, enjuagaban y desinfectaban correctamente, o el desinfectante no tenía la concentración adecuada. Las superficies limpias ayudan a evitar que los gérmenes lleguen a la comida.
Redacción oficial (en inglés): Food contact surfaces clean, sanitized
Nota del inspector (en inglés): Quaternary ammonia sanitizer solution at the three compartment sink measured at 0 PPM. No warewashing was taking place. [CA] Manual sanitization shall be accomplished in the final sanitizing rinse by contacting a chlorine solution of 100 PPM concentration for at least 30 seconds or by contacting a quaternary ammonium solution of 200 PPM concentration for at least 60 seconds. [COS] Solution was adjusted to 200 ppm.