26 ago 2026 · Routine
Aprobado
- Hallazgo Alimentos a una temperatura insegura
Los alimentos no se mantenían lo suficientemente fríos o calientes, no se enfriaban con la rapidez necesaria, o no se cocinaban o recalentaban a la temperatura correcta. Las bacterias crecen rápido en la "zona de peligro" entre 41 °F y 135 °F (5 °C a 57 °C), por lo que esta es una de las revisiones de seguridad alimentaria más importantes.
Redacción oficial (en inglés): 3-501.16(A)(2) Time/Temperature Control for Safety Food, Hot and Cold Holding (P). The cooler with cheese and meat and hummus and other TCS foods was holding the food all with internal food temperatures of 49*F-51*F. Except during preparation, cooking, cooling, hot holding, or when time is used as the public health control time/temperature control for safety food shall be maintained at 41 degrees f or less. Items were all discarded by manager and cooler to repaired before further use for these items. - Hallazgo Alimentos a una temperatura insegura
Los alimentos no se mantenían lo suficientemente fríos o calientes, no se enfriaban con la rapidez necesaria, o no se cocinaban o recalentaban a la temperatura correcta. Las bacterias crecen rápido en la "zona de peligro" entre 41 °F y 135 °F (5 °C a 57 °C), por lo que esta es una de las revisiones de seguridad alimentaria más importantes.
Redacción oficial (en inglés): 3-501.17 Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) Observed a commercially made dip that was not factory 7 weeks past its use by date. Foods that are time/temperature controlled for safety and held for more than 24 hours must be date marked and used within 7 days of preparation. Education provided. - Hallazgo Químicos guardados o usados de forma insegura
Productos de limpieza, pesticidas u otros químicos estaban guardados o etiquetados de una manera que podría permitir que llegaran a los alimentos. Es grave porque la contaminación química puede enfermar a las personas rápidamente.
Redacción oficial (en inglés): 5-101.12 System Flushing and Disinfection. Facility is currently out of compliance with CDPHE for failure to complete the Department approved start -up proceudre, and then not notify users of the violation. During construction, repair, or modification, water systems may become contaminated with microbes from soil because pipes are installed underground or by chemicals resulting from soldering and welding. Floods and other incidents may also cause water to become contaminated. Chemical contaminants such as oils may also be present on or in the components of the system. To render the water safe, the system must be properly flushed and disinfected before being placed into service.Facility is working to correct this violation.