ROUTINE - STANDARD INSPECTION
May 22, 2026
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, May 22, 2026 · Original Source
We'll email you when The Base Camp has a new health inspection. No spam, one-click unsubscribe.
Own this restaurant? Add an inspection badge to your website · Inspection prep checklist
ROUTINE - STANDARD INSPECTION
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, May 22, 2026 · Original Source
ROUTINE - CRITICAL CONTROL POINT
13 recorded violations
4.5(A)(2)(3) - Food-Contact Surfaces of Cooking Equipment and Pans and Nonfood-Contact Surfaces Equipment
The food contact surfaces of cooking equipment and pans and Nonfood contact surfaces of equipment are to be kept free of an accumulation of dust, dirt, food residue, and other debris. Vent in cooler upstairs was observed to have large buildup of dust. +COS
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperature2.4(A)(3) - IV. Demonstration of Knowledge - Certified Manager
No manager had Ohio manager certification in food protection.
A required permit, food safety certificate, trained manager, or posted sign was missing or not current. These show the business is following the rules and has trained staff.
More about paperwork, training, or posting issues2.4(C)(18) - I. Employee Health - Written Procedures for Cleaning Up Vomiting and Diarrheal Events
No/inadequate written procedures for response to vomiting/diarrheal events.
This covers things like hair restraints, jewelry, clean clothing, eating or drinking in food prep areas, touching ready-to-eat food with bare hands, or not having a sick-employee policy.
More about employee hygiene or health policy issues3.4(H)(1) - VI. Time/Temperature Controlled Safety Food - Ready-to-eat, TCS - disposition
Ready-to-eat, TCS food was not discarded by the date mark, or was undated and not discarded or was not discarded when the date mark exceeded the required time/temperature combination. Food in cooler was observed present when past date marked day. +COS
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperature3.4(F)(1)(b) - VI. Time/Temperature Controlled Safety Food - Time/Temperature Controlled for Safety Food - Cold Holding
TCS foods were being held at temperatures >41° F. TCS foods for cold holding in burger topping station were observed to be above 41 degrees. Staff advised to dump toppings, come up with temporary solution for cold holding, and fix cold holding station.
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperature3.1(L) - V. Food from Approved Source - Package Integrity - Specifications for Receiving
Food packaging does not protect food from contamination. Canned food in basement observed to have rust around lips of cans. Canned food was also observed cracked open and leaking. Advised an immediate sweep of shelves and disposal of unsafe canned food. +COS
Food came from an unapproved source, was missing required date marks or labels, or was past its use-by date. Knowing where food came from and how old it is helps prevent illness.
More about food source, dating, or labeling problems4.4(P) - Warewashing equipment: Determining Chemical Sanitizer Concentration
Sanitizer concentration is not being monitored. Sanitizer concentration for wiping cloth buckets were observed to not have concentration being monitored.
Cleaning products, pesticides, or other chemicals were stored or labeled in a way that could let them get into food. This is serious because chemical contamination can make people sick quickly.
More about chemicals stored or used unsafely6.4(B)(1) - Cleaning- Frequency and Restrictions
The physical facilities are not cleaned as often as necessary to keep them clean. Ceiling was observed to have dust accumulating over different stations in both the upstairs and downstairs. Clean ceilings as soon as possible to avoid dust contamination.
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problems4.1(Z) - Temperature Measuring Device - Functionality
Temperature measuring devices are missing, not correctly placed, not readable, or of improper design. Physical thermometer missing from fridge downstairs.
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperature4.4(A)(2) - Equipment - Good Repair and Proper Adjustment
Equipment components were not intact, tight or properly adjusted. Sanitizer dispenser in downstairs kitchen observed to not be working properly in dispensing sanitizer.
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issues3701-21-25 (K) - Person in Charge Certification in Food Protection FSO
No person in charge certified in food protection was at the FSO where it is needed.
A required permit, food safety certificate, trained manager, or posted sign was missing or not current. These show the business is following the rules and has trained staff.
More about paperwork, training, or posting issues3.2(K) - In-use utensils - between-use storage
In-use utensils are improperly stored. In use utensil observed sitting on counter and on food bag rather than peerage clean surface.
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issues2.3(D) - Hair restraints, effectiveness
Food employee(s) did not have their hair effectively restrained by wearing a hair covering. Observed many employees that were not wearing any hair restraint/cover.
This covers things like hair restraints, jewelry, clean clothing, eating or drinking in food prep areas, touching ready-to-eat food with bare hands, or not having a sick-employee policy.
More about employee hygiene or health policy issuesOfficial record from Cincinnati Health Department, May 14, 2026 · Original Source
COMPLAINT - COMPLAINT
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, May 14, 2026 · Original Source
ROUTINE - STANDARD INSPECTION
1 recorded violation
4.6(C)(2) - VII. Protection from Contamination - Sanitizing Frequency Utensils/Food Contact Surfaces - Before Use After Cleaning
After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F. Mechanical dish machine was not repaired at time of inspection. Person in charge said repairs need to be made to ventilation hood. Continue to use 3-comp sink for dishes until fixed.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contaminationOfficial record from Cincinnati Health Department, Nov 20, 2025 · Original Source
ROUTINE - CRITICAL CONTROL POINT
2 recorded violations
4.6(C)(2) - VII. Protection from Contamination - Sanitizing Frequency Utensils/Food Contact Surfaces - Before Use After Cleaning
After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F. Observed mechanical dish machine not reaching a surface contact temperature of 160 F for final rinse temperature. Returning to see fixed machine.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contamination4.6(C)(3) - VII. Protection from Contamination - Sanitizing Frequency Utensils/Food Contact Surfaces - Before Use After Cleaning
After being cleaned, food-contact surfaces and utensils were not sanitized using an effective or approved combination of exposure time, chemical concentration, temperature, and/or pH. Observed quat ammonia dispenser not reaching appropriate concentration for sanitizing dishes. Had person in charge manually add sanitizer until dispenser was fixed. +COS
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contaminationOfficial record from Cincinnati Health Department, Nov 14, 2025 · Original Source
ROUTINE - STANDARD INSPECTION
1 recorded violation
4.6(C)(2) - VII. Protection from Contamination - Sanitizing Frequency Utensils/Food Contact Surfaces - Before Use After Cleaning
After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F. Observed final rinse not reaching a 160 surface temp on dishes. Final rinse temp was above 190 on temp guage, may be evaporating/too hot. Must use 3-comp sink until fixed.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contaminationOfficial record from Cincinnati Health Department, Jul 3, 2025 · Original Source
ROUTINE - CRITICAL CONTROL POINT
7 recorded violations
4.5(B)(1)(e) - VII. Protection from Contamination - Equipment Food Contact Surfaces and Utensils – Cleaning Frequency
Food-contact surfaces or utensils not cleaned when they were contaminated. Observed flies and gnats on food contact surfaces in basement ware washing area. Had PIC rewash utensils.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contamination4.5(B)(3) - VII. Protection from Contamination - Equipment Food Contact Surfaces and Utensils – Cleaning Frequency
Surfaces and/or utensils used for TCS foods not cleaned every 4 hours. Spoke with PIC about grill spatulas and frequency of cleaning, PIC said they are cleaned at end of day. If they are not maintained in 41 degrees or 135 degrees they should be cleaned every 4 hours.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contamination4.5(D) - Nonfood-contact surfaces - cleaning frequency
Nonfood-contact surfaces are not cleaned frequently enough. Observed debris and grease behind equipment and areas that need to be cleaned more frequently. Pay attention to areas under warewashing machine, drains, behind grills and fryers.
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problems6.4(K) - Controlling Pests
The presence of insects, rodents, and other pests is not being adequately controlled or minimized. Observed heavy amounts of insects and flies in the warewashing area of the facility. Please have pest control come out to treat.
The inspector found mice, rats, cockroaches, flies, or evidence of them (like droppings) inside the business, or conditions that could attract them. Pests can spread bacteria to food and surfaces, so this is treated as one of the more serious findings.
More about signs of rodents or insects3.5(D)(6) - Other Forms of Information
The license holder did not notify customers of the presence of major allergens as an ingredient in unpackaged food items served or sold to the customer. Please create one general allergen consumer warning for all menu items that contain allergens as ingredients.
An issue that does not fit the common categories. Check the official wording for details.
More about other finding4.6(C)(2) - VII. Protection from Contamination - Sanitizing Frequency Utensils/Food Contact Surfaces - Before Use After Cleaning
After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F. Observed mechanical dish machine not reaching 160 degree surface temp. Hot water sanitizer may be too hot and vaporizing.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contamination4.4(A)(2) - Equipment - Good Repair and Proper Adjustment
Equipment components were not intact, tight or properly adjusted. Observed heavy water dripping in the walk-in cooler outside, please repair.
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesOfficial record from Cincinnati Health Department, Jun 27, 2025 · Original Source
COMPLAINT - COMPLAINT
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Dec 20, 2024 · Original Source
ROUTINE - CRITICAL CONTROL POINT
1 recorded violation
4.6(C)(2) - VII. Protection from Contamination - Food contact surfaces Hot water sanitizing
After being cleaned, equipment food-contact surfaces and utensils were not sanitized in equipment achieving a utensil surface temperature of 160° F. Operator switched to 3-comp sink for sanitizing dishes.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contaminationOfficial record from Cincinnati Health Department, Nov 18, 2024 · Original Source
ROUTINE - CRITICAL CONTROL POINT
4 recorded violations
2.3(A) - II. Good Hygienic Practices - Food contamination
Employees were eating, drinking or using tobacco in non-designated areas. Observed unlidded employee beverage on top of the dishwashing machine. Store personal items below/away from food and food contact surfaces.
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contamination4.4(A)(1) - Equipment
Equipment and/or components were not maintained in good working order. No grease catch pan within the ventilation hood to catch grease dripping.
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issues6.4(A) - Facilities: Maintenance: Good repair
The physical facilities were not maintained in good repair. Observed burned out bulbs within the ventilation hood. Repair/replace the bulbs.
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issues6.4(B)(1) - Facilities: Cleaning: Frequency
The physical facilities are not cleaned as often as necessary to keep them clean. Clean: lower level - ceiling, dust and mold present floor area behind the cooking line upper level - clean behind the fryer bulbs within the ventilation hood
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsOfficial record from Cincinnati Health Department, Jun 13, 2024 · Original Source