COMPLAINT - COMPLAINT
Sep 9, 2026
Approved - No Violations
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Sep 9, 2026 · Original Source
Cincinnati, OH
The Westin Cincinnati - Main Kitchen
21 E 5th St
Last inspected Sep 9, 2026 · View Map ↗ · Compare ↗
Approved - No Violations
Get the next inspection, free.
We'll email you when The Westin Cincinnati - Main Kitchen has a new health inspection. No spam, one-click unsubscribe.
Own this restaurant? Add an inspection badge to your website · Inspection prep checklist
SteadyThe last two inspections recorded a similar number of violations. Review the dated records below.
The full inspection history
13 inspectionsROUTINE - CRITICAL CONTROL POINT
Jun 10, 2026
Approved - No Violations
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Jun 10, 2026 · Original Source
COMPLAINT - COMPLAINT
Jun 10, 2026
Approved - No Violations
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Jun 10, 2026 · Original Source
ROUTINE - STANDARD INSPECTION
Dec 15, 2025
Approved - Minor Violations
3 recorded violations
notedCode 4.1(N)Cleaning and sanitizing
Official wording
4.1(N) - Pressure Measuring Devices for Mechanical Warewashing Equipment - Accuracy
Inspector’s notes
Pressure measuring devices on the dish machine were not accurate or were not properly scaled. PIC indicated parts for repairs have been ordered. Supplemental ware washing to be used in interimly.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 6.4(A)Facility maintenance
Official wording
6.4(A) - Repairing
Inspector’s notes
The physical facilities were not maintained in good repair. Significant improvements and repairs are needed throughout facility. Facility continues to make improvements and necessary repairs.
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesnotedCode 4.4(A)(2)Equipment and utensils
Official wording
4.4(A)(2) - Equipment - Good Repair and Proper Adjustment
Inspector’s notes
Equipment components were not intact, tight or properly adjusted. Observed various pieces of equipment throughout facility in disrepair. Facility continues to make improvements and repair/replace equipment.
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesOfficial record from Cincinnati Health Department, Dec 15, 2025 · Original Source
ROUTINE - CRITICAL CONTROL POINT
Dec 3, 2025
Not In Compliance
8 recorded violations
notedCode 6.4(B)(1)Cleaning and sanitizing
Official wording
6.4(B)(1) - Cleaning- Frequency and Restrictions
Inspector’s notes
The physical facilities are not cleaned as often as necessary to keep them clean. Deep, thorough cleaning of facility is needed.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 6.4(F)Other
Official wording
6.4(F) - Drying Mops
Inspector’s notes
After use, mops are not placed in a position that allows them to air-dry without soiling walls, equipment, or supplies.
In plain English
An issue that does not fit the common categories. Check the official wording for details.
More about other findingnotedCode 4.5(D)Cleaning and sanitizing
Official wording
4.5(D) - Nonfood-contact surfaces - cleaning frequency
Inspector’s notes
Nonfood-contact surfaces of equipment are not cleaned frequently enough.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3.4(G)(1)Food temperature
Official wording
3.4(G)(1) - VI. Time/Temperature Controlled Safety Food - Ready-to-eat, TCS - date marking
Inspector’s notes
Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. Observed various RTE, TCS foods held with no discard date. PIC to ensure all RTE, TCS foods held for >24hrs are properly date marked.
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 4.1(N)Cleaning and sanitizing
Official wording
4.1(N) - Pressure Measuring Devices for Mechanical Warewashing Equipment - Accuracy
Inspector’s notes
Pressure measuring devices on the dish machine were not accurate or were not properly scaled. Observed main dish machine produce 5psi at final rinse. Provide necessary repairs. PIC to ensure equipment is operating to manufacturer specification prior to next usage.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3.2(M)(2)(a)Cleaning and sanitizing
Official wording
3.2(M)(2)(a) - Wiping cloths - use limitation
Inspector’s notes
Wet wiping cloth was not maintained in a sanitizer solution between uses.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 6.4(A)Facility maintenance
Official wording
6.4(A) - Repairing
Inspector’s notes
The physical facilities were not maintained in good repair. Significant improvements and repairs are needed throughout facility. Replace missing tiles in rear kitchen prep/production area.
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesnotedCode 4.4(A)(2)Equipment and utensils
Official wording
4.4(A)(2) - Equipment - Good Repair and Proper Adjustment
Inspector’s notes
Equipment components were not intact, tight or properly adjusted. Observed various pieces of equipment throughout facility and disrepair. PIC indicated new ownership group has committed to significant investments in repairs/replacements in 2026.
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesOfficial record from Cincinnati Health Department, Dec 3, 2025 · Original Source
COMPLAINT - COMPLAINT
Oct 27, 2025
Approved - No Violations
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Oct 27, 2025 · Original Source
ROUTINE - CRITICAL CONTROL POINT
Jul 8, 2025
Approved - Minor Violations
4 recorded violations
notedCode 6.4(A)Facility maintenance
Official wording
6.4(A) - Repairing
Inspector’s notes
The physical facilities were not maintained in good repair. Observed missing/damage ceiling tiles throughout facility. Repair/replace.
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesnotedCode 4.5(D)Cleaning and sanitizing
Official wording
4.5(D) - Nonfood-contact surfaces - cleaning frequency
Inspector’s notes
Nonfood-contact surfaces are not cleaned frequently enough. Observed various equipment surfaces soiled with residues and/or food debris. Increase cleaning frequency and maintain clean to sight and touch.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3.4(G)(1)Food temperature
Official wording
3.4(G)(1) - VI. Time/Temperature Controlled Safety Food - Ready-to-eat, TCS - date marking
Inspector’s notes
Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. Observed various RTE, TCS foods with no discard date. PIC indicated observed foods were prepared on 7/6/25 and 7/7/25.
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 6.4(B)(1)Cleaning and sanitizing
Official wording
6.4(B)(1) - Cleaning- Frequency and Restrictions
Inspector’s notes
The physical facilities are not cleaned as often as necessary to keep them clean. Increase cleaning frequency of kitchen prep/production areas and main kitchen cookline/service areas.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsOfficial record from Cincinnati Health Department, Jul 8, 2025 · Original Source
ROUTINE - CRITICAL CONTROL POINT
Feb 11, 2025
Approved - Minor Violations
3 recorded violations
notedCode 6.2(B)Handwashing
Official wording
6.2(B) - III. Preventing Contamination by Hands - Facilities
Inspector’s notes
Each handwashing lavatory did not have a supply of hand cleanser. Observed 3rd floor dish hand sink with no cleanser. Maintain supplied.
In plain English
Staff were not washing their hands when required, or a handwashing sink was blocked, missing soap or paper towels, or used for something else. Hands are one of the most common ways germs reach food.
More about handwashing problemsnotedCode 3.4(G)(2)Food temperature
Official wording
3.4(G)(2) - VI. Time/Temperature Controlled Safety Food - Ready-to-eat, TCS - date marking
Inspector’s notes
Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked. Observed various opened bulk RTE, TCS deli meats with no discard date. PIC to ensure all required foods are properly date marked with discard date.
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 6.4(A)Facility maintenance
Official wording
6.4(A) - Facilities: Maintenance: Good repair
Inspector’s notes
The physical facilities were not maintained in good repair. Observed missing/damaged ceiling tiles above 3rd floor dish machine. Replace.
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesOfficial record from Cincinnati Health Department, Feb 11, 2025 · Original Source
ROUTINE - STANDARD INSPECTION
Sep 23, 2024
Approved - Violations Abated
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Sep 23, 2024 · Original Source
ROUTINE - STANDARD INSPECTION
Aug 26, 2024
Not In Compliance
0 recorded violations
No violations recorded in this inspection.
Official record from Cincinnati Health Department, Aug 26, 2024 · Original Source
ROUTINE - CRITICAL CONTROL POINT
Aug 21, 2024
Not In Compliance
5 recorded violations
notedCode 4.4(A)(1)Equipment and utensils
Official wording
4.4(A)(1) - Equipment
Inspector’s notes
Equipment and/or components were not maintained in good working order. Observed main dish machine in disrepair. Provide necessary repairs.
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesnotedCode 4.4(L)Contamination
Official wording
4.4(L) - VII. Protection from Contamination - Mechanical warewashing
Inspector’s notes
The rinse temperature in a mechanical warewashing operation was not adequate to sanitize dishes and utensils. Observed final rinse temperature <180F. Article surface temperature = 134F. PIC placed service call for diagnostics and necessary repairs. Discontinue usage of equipment until necessary repairs are completed. Supplemental warewashing to be used interimly. PIC to provide service report to Inspector upon receipt.
In plain English
Food was stored or handled in a way that could let germs or other material get into it, such as raw meat stored above ready-to-eat food or uncovered food. Cross-contamination is a common cause of foodborne illness.
More about food not protected from contaminationnotedCode 6.4(A)Facility maintenance
Official wording
6.4(A) - Facilities: Maintenance: Good repair
Inspector’s notes
The physical facilities were not maintained in good repair.
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesnotedCode 3.4(G)(1)Food temperature
Official wording
3.4(G)(1) - VI. Time/Temperature Controlled Safety Food - Ready-to-eat, TCS - date marking
Inspector’s notes
Refrigerated, ready-to-eat, TCS food that is prepared in the food facility and held refrigerated for more than 24 hours is not properly date marked. Observed various RTE, TCS foods prepared within facility with no discard date. PIC to ensure all required date marking is completed.
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 6.4(B)(1)Cleaning and sanitizing
Official wording
6.4(B)(1) - Facilities: Cleaning: Frequency
Inspector’s notes
The physical facilities are not cleaned as often as necessary to keep them clean. Deep, thorough cleaning of facility is needed.
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsOfficial record from Cincinnati Health Department, Aug 21, 2024 · Original Source
ROUTINE - STANDARD INSPECTION
Jan 25, 2024
Abated On-Site
5 recorded violations
notedCode 3717-1-06.4(B)(1)Cleaning and sanitizing
Official wording
"3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
Inspector’s notes
"Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3717-1-04.1(Y)Food temperature
Official wording
"3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
Inspector’s notes
"Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design. Observed various TCS food storage units with no internal, ambient air thermometers. Provide and maintain in all TCS food storage units."
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 3717-1-04.2(G)(2)Food temperature
Official wording
"3717-1-04.2(G)(2) - Violation - Food temperature measuring devices for thin foods. The operator does not have a readily accessible thermometer capable of accurately measuring the temperature in thin foods."
Inspector’s notes
"Food temperature measuring devices for thin foods. The operator does not have a readily accessible thermometer capable of accurately measuring the temperature in thin foods. Provide and maintain on site."
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 3717-1-03.2(K)Equipment and utensils
Official wording
"3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored."
Inspector’s notes
"In-use utensils-between-use storage In-use utensils are improperly stored. Observed ice scoop stored directly on exterior of ice machine. Provide container/holder for proper storage. PIC to ensure in-use utensils are properly stored, per Code."
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesnotedCode 3717-1-04.2(I)Cleaning and sanitizing
Official wording
"3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
Inspector’s notes
"Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer. Provide and maintain."
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsOfficial record from Cincinnati Health Department, Jan 25, 2024 · Original Source
ROUTINE - STANDARD INSPECTION
Dec 11, 2023
Not Abated
11 recorded violations
notedCode 3717-1-04.2(G)(2)Food temperature
Official wording
"3717-1-04.2(G)(2) - Violation - Food temperature measuring devices for thin foods. The operator does not have a readily accessible thermometer capable of accurately measuring the temperature in thin foods."
Inspector’s notes
"Food temperature measuring devices for thin foods. The operator does not have a readily accessible thermometer capable of accurately measuring the temperature in thin foods. Provide and maintain on site."
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 3717-1-04.1(Y)Food temperature
Official wording
"3717-1-04.1(Y) - Violation - Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design."
Inspector’s notes
"Temperature Measuring Devices Temperature measuring devices are missing, not correctly placed, not readable, or of improper design. Observed various TCS food storage units with no internal, ambient air thermometers. Provide and maintain in all TCS food storage units."
In plain English
Food was not kept cold enough, hot enough, cooled fast enough, or cooked or reheated to the right temperature. Bacteria grow quickly in the "danger zone" between 41°F and 135°F, which makes this one of the most important food-safety checks.
More about food kept at an unsafe temperaturenotedCode 3717-1-03.4(G)(2)Food source and labeling
Official wording
"3717-1-03.4(G)(2) - Violation - RTE TCS, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked."
Inspector’s notes
"OBSERVATION: RTE TCS, date marking-prepared in processing plant Ready-to-eat, TCS food that was prepared in a food processing plant and subsequently opened in a FSO or a RFE is not properly date marked. Observed various RTE, TCS foods, held within facility, with no discard date. CORRECTIVE ACTION: PIC to ensure all opened processed and/or prepared TCS foods, held >24 hrs, have discard date clearly marked. *** Best practice is to date mark open/prep date and discard date on all items. *** *Items date marked observed with prep/production dates within 7-day permitted holding time frame."
In plain English
Food came from an unapproved source, was missing required date marks or labels, or was past its use-by date. Knowing where food came from and how old it is helps prevent illness.
More about food source, dating, or labeling problemsnotedCode 3717-1-02.4(A)(2)Permits, training, and postings
Official wording
"3717-1-02.4(A)(2) - Violation - PIC-Level 2 Certification No manager has level 2 certification in food protection."
Inspector’s notes
"PIC-Level 2 Certification No manager has level 2 certification in food protection. Provide Ohio Department of Health Food Protection Manager Certificate. Maintain/display certification on premises."
In plain English
A required permit, food safety certificate, trained manager, or posted sign was missing or not current. These show the business is following the rules and has trained staff.
More about paperwork, training, or posting issuesnotedCode 3717-1-04.2(I)Cleaning and sanitizing
Official wording
"3717-1-04.2(I) - Violation - Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer."
Inspector’s notes
"Sanitizing solutions-testing devices. There is no test kit available for measuring the concentration of the sanitizer. Provide and maintain."
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3717-1-06.2(C)Handwashing
Official wording
"3717-1-06.2(C) - Violation - Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
Inspector’s notes
"Facilities-hand drying provision Handwashing lavatory had no, unapproved, or inoperable hand drying provision."
In plain English
Staff were not washing their hands when required, or a handwashing sink was blocked, missing soap or paper towels, or used for something else. Hands are one of the most common ways germs reach food.
More about handwashing problemsnotedCode 3717-1-06.2(B)Handwashing
Official wording
"3717-1-06.2(B) - Violation - Facilities-handwashing cleanser availability Each handwashing lavatory did not have a supply of hand cleanser."
Inspector’s notes
"Facilities-handwashing cleanser availability Each handwashing lavatory did not have a supply of hand cleanser."
In plain English
Staff were not washing their hands when required, or a handwashing sink was blocked, missing soap or paper towels, or used for something else. Hands are one of the most common ways germs reach food.
More about handwashing problemsnotedCode 3717-1-06.4(B)(1)Cleaning and sanitizing
Official wording
"3717-1-06.4(B)(1) - Violation - Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
Inspector’s notes
"Facilities: Cleaning: Frequency The physical facilities are not cleaned as often as necessary to keep them clean."
In plain English
Dishes, equipment, or surfaces that touch food were not properly washed, rinsed, and sanitized, or sanitizer was not at the right strength. Clean surfaces help stop germs from spreading to food.
More about cleaning or sanitizing problemsnotedCode 3717-1-06.4(A)Facility maintenance
Official wording
"3717-1-06.4(A) - Violation - Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair."
Inspector’s notes
"Facilities: Maintenance: Good repair The physical facilities were not maintained in good repair. Provide all necessary repairs within facility."
In plain English
Floors, walls, ceilings, lighting, ventilation, or garbage areas needed repair or cleaning. These are usually less urgent than food-handling problems but still need to be fixed.
More about building upkeep issuesnotedCode 3717-1-04.4(A)(1)Equipment and utensils
Official wording
"3717-1-04.4(A)(1) - Violation - Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order."
Inspector’s notes
"Equipment-good repair and proper adjustment. Equipment and/or components were not maintained in good working order. Observed various pieces of mechanical equipment throughout facility in disrepair or nonfunctional. Provide necessary repairs and/or replace/remove impacted equipment."
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesnotedCode 3717-1-03.2(K)Equipment and utensils
Official wording
"3717-1-03.2(K) - Violation - In-use utensils-between-use storage In-use utensils are improperly stored."
Inspector’s notes
"In-use utensils-between-use storage In-use utensils are improperly stored. Observed ice scoop stored directly on exterior of ice machine. Provide container/holder for proper storage. PIC to ensure in-use utensils are properly stored, per Code."
In plain English
Equipment, utensils, thermometers, cutting boards, or single-use items were not in good condition, not the right type, or not stored properly.
More about equipment or utensil issuesOfficial record from Cincinnati Health Department, Dec 11, 2023 · Original Source